BOB Gear Stroller Manual de Instruções descarregar pdf (Página 11)

11

OMA46B

NOTE: For the hand brake to work

correctly, it is critical that it be

adjusted properly. Squeeze the brake

lever and verify that the brake pads

contact the rim. Verify brake quick

release is in closed position. See

Front Wheel Installation section.

The hand brake system is equipped

with two barrel adjusters. If you are

not familiar with how to use the

barrel adjusters, please contact BOB

customer service or visit your local

dealer for assistance.

1. Align Brake Pads

If brakes are misaligned, use a 10mm

wrench to loosen brake pad nuts,

slide pads into correct position and

tighten securely.

CLOSE

2. Adjust Cable Tension

The cable tension is pre-adjusted at

the factory, but the brake cable will

need periodic adjustment (as the

cable stretches slightly and the black

cable housing compresses over time).

To adjust cable tension, there are two

barrel adjusters in the brake system;

one at the hand brake lever, and one at

the caliper brake. To adjust the brake

cable tension, one or both barrel

adjusters may need to be adjusted.

HAND BRAKE

Handlebar

Hand Brake Lever

CALIPER BRAKE

CLOSE

Barrel Adjuster

Brake Caliper

Brake Caliper

Mounting Nut

Lock Ring

To tighten the cable, loosen the lock

ring and turn the barrel adjuster in

the counter clockwise direction.

Secure the barrel adjuster in the new

position by tightening the lock ring

against the caliper or brake lever

body.

To loosen the cable, turn the barrel

adjuster in a clockwise direction and

secure by tightening the lock ring.

There should be a 3/16”(5mm)

clearance between the rim and brake

pads.

3. Reposition Brake Caliper

If gap is not equal on each brake

pad, the brake caliper can easily be

repositioned on the frame by

loosening the caliper mounting nut

with a 10mm wrench, adjust caliper

position and re-tighten the same nut.

Brake Pad

If you do not

understand these instructions, or

feel the brake is adjusted

incorrectly, take the stroller to your

dealer for proper adjustment. If

your brake pads are worn, see your

dealer for replacements.

Brake Caliper

Brake Pad Aligned With Rim

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Comentários a estes Manuais

Sem comentários